compa 300 JET - English

COMPA TECH S.r.l.
Web: www.compasaw.com - E-mail: info@compasaw.com
Tel. (+39) 059 527887 - Fax (+39) 059527889
- 21 -
ENGLISH
Operator’s handbook
SUMMARY
GENERAL INFORMATION
ON THE MANUFACTURER ............................... 20
MACHINE IDENTIFICATION .............................. 20
1. GENERAL INFORMATION
ON THE MANUAL ..................................... 22
1.1 Initial safety warnings ........................ 22
1.2 Warranty .......................................... 22
2. GENERAL SAFETY INDICATIONS ............. 23
2.1 Transport warnings ............................... 23
2.2 Installation warnings ............................ 23
2.3 Individual safety guard ......................... 23
2.4 Warnings for proper use
of the machine ..................................... 23
2.5 Warning for proper
product maintenance ............................ 24
2.6 Electric safety warnings ......................... 24
2.7 Electric warnings during installation ........ 25
2.8 Safety warnings
for noise and vibrations ...................... 26
2.9 Residual risks .................................... 26
2.10 Special warnings ............................... 26
3. TECHNICAL INFORMATIONS ................... 27
3.1 Technical features................................ 27
3.2 Description of main parts .................... 27
3.3 Optionals .......................................... 27
3.4 Noise levels ...................................... 27
3.5 Specifi c safety warnings ..................... 27
4. LIFTING .................................................. 28
5. INSTALLATION ........................................ 28
5.1 Installation .......................................... 28
5.2 Lifting ................................................. 28
5.3 Positioning ........................................... 28
5.4 Electrical connection ............................. 29
5.5 Suction connection ............................... 29
5.6 Adjustments ........................................ 29
5.7 Type of service of the machine ............... 30
6. USE .................................................. 31
6.1 Preliminary checking ............................. 31
6.2 Lower part cutting operation .................. 31
6.3 Cutting on the upper surface ................. 31
7. SAFETY DEVICES ..................................... 32
8. MAINTENANCE ........................................ 33
8.1 Adjusting the blade stop time ................ 33
8.2 Adjusting the arm return spring ............. 33
9. TROUBLESHOOTING ................................ 34
9.1 The blade doesn’t cut completely ........... 34
9.2 Error in the cutting angle ...................... 34
9.3 Error in the max table rotation ............... 34
9.4 Error in the arm inclination .................... 34
10. DISPOSALS ......................................... 34
11. DECLARATION OF CONFORMITY ......... 35
12. ELECTRIC DIAGRAMS .......................... 36
13. SPARE PARTS ..................................... 37
FIGURE AND TABLES........................... 39
NOTE .................................................. 49