Compak E5 - Machine Identification Plate; Technical Characteristics; Scope of Use; Electrical and Performance Data

7
K09657H02 | PROC-CAL/002/03 USER MANUAL | V. 11/07/2023
The technical characteristics
plate is indelibly marked with the
following information:
. IDENTIFICATION
.. SCOPE
The coee grinders are intended for
commercial applications where ground
coee must be used, or in small shops
selling coee, but not for continuous mass
production of food.
This grinder should only be
used to grind coee beans.
Any other use is considered
improper and dangerous.
NOTE: The manufacturer reserves
the right to change the machine
components, according to the
requirements of each market, and
also for technological advances.
NOTE: The manufacturer is not
liable for damage to persons, goods,
or the machine itself, if the safety
regulations given in this manual are
not followed, or the machine is used
incorrectly.
. TECH. CHARACTERISTICS
.. TECHNICAL DATA
Model
100 V
50 Hz
100 V
60 Hz
110 V
60 Hz
220 V
60 Hz
230 V
50 Hz
240 V
50 Hz
E5
Electrical Power
480 450 550 580 550 570 W
Spin Speed
1.360 1.670 1.690 1.650 1.370 1.385 rpm
E6
E8
Electrical Power
600 600 700 730 630 650 W
Spin Speed
1.270 1.530 1.580 1.500 1.290 1.310 rpm
E10
Electrical Power
750 770 800 780 950 970 W
Spin Speed
332,5 400 412,5 410 342,5 345
rpm