10. The CTFT display cable is disconnected by pulling upward on the tabs
on the back of the connector.
Replacing the CTFT (10.4 in) Display Panel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CAUTION <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
When servicing the computer, ensure that cables are placed in their proper
location to avoid pinching during the reassembly process. Improper cable
placement can cause severe damage to the unit.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
To replace the CTFT (10.4 in) panel, follow these steps:
1. Connect the display cable to the connector on the back of the CTFT
(10.4 in) panel (Figure 5-102).
To Next Page
Loading...
