Type:
Where Used: Trackball assembly to base
Drive: SL/T8
Quantity Required: 2
---------------------------------------------------------------------------
Description: M2.5 x 5.0
Type:
Where Used: Hard drive bracket to system chassis
Drive: T8
Quantity Required: 1
---------------------------------------------------------------------------
Description: M2.5 x 4.0
Type:
Where Used: CPU cover to keyboard
Drive: SL/T8
Quantity Required: 7
---------------------------------------------------------------------------
Description: M2.5 x 24.0
Type:
Where Used: Bottom of unit
Drive: SL/T8
Quantity Required: 7
---------------------------------------------------------------------------
Description: M2.5
Type: Shoulder
Where Used: Handle Bracket to clutch/through CPU base
Drive: T8
Quantity Required: 2
---------------------------------------------------------------------------
Description: M3.0
Type: Truss
Where Used: Hard drive bracket to hard drive
Drive: T8
Quantity Required: 4
---------------------------------------------------------------------------
Description: M3.0
Type: Truss
Where Used: Diskette drive bracket to diskette drive
Drive: T8
Quantity Required: 2
---------------------------------------------------------------------------
Description: M2.6
Type: Fillister
Where Used: Diskette drive bracket to diskette drive
Drive: T8
Quantity Required: 4
---------------------------------------------------------------------------
Description:
Type: Screw lock
Where Used: Back of unit
Drive: 3/16" Hex
Quantity Required: 6
---------------------------------------------------------------------------
Description: M3.0
Type: Truss
Where Used: Panel Display
Drive: T8
Quantity Required: 4
---------------------------------------------------------------------------
Description: M2.5 x 10.0
Type: Truss
Where Used: Heatspreader to chassis
Drive: T8
Quantity Required: 1
===========================================================================
Description: M2.5 x 5.0
To Next Page
Loading...
Need help?
General