. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Computer Removal and Replacement Procedures 7-23
7.11 Microphone/Display Cable
Cover and Microphone
To remove the microphone and microphone/display cable cover, complete the
following steps:
1. Disconnect the AC power and any external devices (Section 7.4.1).
2. From the rear of the computer, remove two screws securing the microphone/display
cable cover from the base enclosure.
Figure 7-19. Removing the Microphone/Display Cable Cover Screws
To Next Page
Loading...
