. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-26 Computer Removal and Replacement Procedures
7.12 Clutch Covers/Display Assembly
7.12.1 Clutch Covers
CAUTION: Do not reuse the clutch screws removed from the old display. These screws
may back out of the display clutches and cause the display assembly to loosen from the
base enclosure.
To remove the left and right clutch covers, lift them from the ends of the computer.
Figure 7-22. Removing the Clutch Covers
Reverse the procedure to install the clutch covers.
To Next Page
Loading...
