Compaq Armada 1500 - Installing the Optional 100 Baset Ethernet Network Module

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-2 Upgrade Procedures for the Convenience Base
8.2.1 Installing the Optional 100BaseT
Ethernet Network Module
To install the 100BaseT module, complete the following procedures:
1. Turn the convenience base bottomside up and remove seven screws from the lower
base plastic housing.
Figure 8-1. Removing the Screws from the Lower Base Plastic Housing