EasyManua.ls Logo

Compaq CONTURA AERO - Page 94

Compaq CONTURA AERO
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Message: 164 Memory Size Error
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Increase in the memory size found compared to the one
stored in CMOS
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
Message: 164 Memory Size Error
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Decrease in the memory size found compared to the one
stored in CMOS
Recommended Action: Run Computer Setup.
---------------------------------------------------------------------------
Message: 167 Lost Power
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Real time clock/calendar battery
Recommended Action: Replace real time clock battery.
---------------------------------------------------------------------------
Message: 167 Lost Power
Beeps: 2 Short (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: RTC has lost power. This only shows up on a cold boot,
no beeps
Recommended Action: Replace real time clock battery.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: RAM failure
Recommended Action: 1. Replace the memory expansion board (Figure 5-1).
2. Replace the system board.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error
Beeps: None (Beeps can be disabled by the user from the
Computer Setup utility.
Probable Cause: Memory test data error
Recommended Action: 1. Replace the memory expansion board (Figure 5-1).
2. Replace the system board.
---------------------------------------------------------------------------
Message: XX000YZZ 201 Memory Error

Related product manuals