14 Compex 16-Port All 10/100 Switch
DS2216
English
Group 1 Group 2
Number of trunk ports
Middle Compex
DS2216[B] possible trunk
combinations
2 3 4 2 3 4
A X X
B X X
C X X
D X X
E X X
F X X
G X X
H X X
I X X
Table 3: Dual Trunks Combinations
• How to enable priority mode for a port
Compex DS2216 supports advanced traffic priority features. It
provides two levels of priority: normal and high priority. Packets in
high priority mode will arrive sooner at the destination MAC address.
1. Press the Mode button several times until the Priority LED lights
up. Check the LED for that port number you want to set. If the port
is lighted up it is already enabled. Do nothing. Otherwise, proceed
to step 2.
2. Now press the Set button once. Port #1 LEDs lights up. Press the
Set button again to jump to next port #2. Continue to press several
times until the desired port LED lights up.
To enable this port, press the Set button and hold it down for about 3
seconds until all ports LEDs flash once.
When successful, this port LED will remain lighted up.
To Next Page
Loading...
Need help?
General
