4 Compex 16-Port All 10/100 Switch
DS2216
English
4. Specifications
•
Industry Standards Complies with IEEE802.3 10Base-T standard,
IEEE802.3u 100Base-TX standard, FCC Class A,
CE Mark.
•
Interface Supports 16 10/100 Mbps ports (RJ-45, UTP):
Half/Full Duplex modes at 10 Mbps and 100
Mbps.
•
LED Indicators LED indicators for system Power, Link, Speed
(10/100Mbps), Duplex status, priority, trunking
and Port (Transmit/ Receive) traffic.
•
Speed Selection N-way Auto-negotiation or Forced Mode.
•
Link Distance
• 100Base-TX
: Requires data grade (Category
5) UTP cable. Segment length can be up to a
maximum of 100 meters on every port.
• 10Base-T
: Requires (Category 3, 4 and 5)
UTP cable. Segment length can be up to a
maximum of 100 meters on every port.
•
Forwarding Method Store-and-Forward.
•
Dynamic Address
Learning/ Filtering
Yes.
•
Power Supply Internal power supply is provided with voltage
ratings of 100VAC to 250VAC, 47~63 Hz.
Operating Temperature:
Storage Temperature:
Operating Humidity:
Storage Humidity:
0°C to 50°C
-20°C to 70°C
10% to 80% RH
5% to 90% RH
•
Environment
Requirements
[RH = Relative Humidity]
•
MAC Address
Table
16K
To Next Page
Loading...
Need help?
General
