BEHAVIOR OF THE MODULE’S LED
The LED alternately flashes green and red: the module is out of range or not recognized by the remote control�
• Ensure the remote control is on.
• Ensure that the module and the remote control are less than 6’ 5” (2 meters) away from each other.
The LED is still red�
• Ensure the module is charged.
• Try to restart the remote control and modules.
• If despite this, the LED is still red, contact customer service provided and approved by Compex.
The LED does not turn on�
• Ensure the module is charged.
• If despite this, the LED still does not turn on, contact customer service provided and approved by Compex.
To Next Page
Loading...
