START A STIMULATION PROGRAM
Before beginning any stimulation program, you must turn the modules on�
To turn on the modules, press their respective On/Off button� As soon as the module is turned on, its battery
level appears on the screen� Turn on the number of modules desired according to the electrode placement
selected� As soon as a sufficient number of modules is turned on, a small arrow appears on the right of the
screen�
STIMULATION ALWAYS STARTS AT 000.
A
B
A Contraction phase
B Warm-up phase
C Active rest phase
E Relaxation phase
F Number of contractions performed / Total number of contraction
G Guiding message
H Help message
A
B
C
E
D
F
G
A Return to the previous step
A Confirm your selection and start the program
To Next Page
Loading...
