CompuSTAR 2WSSR - Resetting the Programming Options to the factory default settings.; Remote-Pager Programming Menu Options

 If you hear a long chirp, you are going out of programming mode,
please go back to Step 1.

If you want to change more options, go back to Step 1.
Resetting the Programming Options to the factory default settings.
Step 1:
Press Buttons
(I+II)
simultaneously or Buttons
(I+III)
simultaneously
for 2 seconds. Step 1 is confirmed by a car chirp and a one-time flashing of
the parking light.
Step 2
: Press Button
III
three times. This is confirmed by a car chirp and
parking light flash each time you press Button
III
. Hence, your car will chirp
and parking light flash three times by pressing Button
III
three times. Your car
is now set to the original factory default settings.
Remote-Pager Programming Menu Options
Programming Menu #1 (Auto-Start and Door Lock Options)
Feature Factory Default
Setting – Button
I
Optional
Setting –
Button
II
1-1 Unlock Before, Lock After
Starting
OFF ON
1-2 Door Lock / Unlock Pulse
Duration
0.5 sec 2.0 sec
1-3 Min. Crank Time for the
Alternator Sensing
0.8 sec 1.0 sec
1-4 Driver’s Priority Unlock OFF ON
1-5 Double Pulse Unlock OFF ON
1-6 Dome Light Factory Rearm OFF ON
© 2001 Firstech, Inc. Page 14