Computherm E280 - 10.2. Programmed Auto Mode

- 35 -
on the thermostat, the output of the thermostat will switch o󰀨.
The temperature to be maintained by the thermostat can be
specied in 0.5°C steps (the minimum and maximum values of
the adjustable range are 5°C and 99°C, respectively).
The currently set temperature can be modied in the following
way:
• Using phone application:
 with the icons
 moving the slide (groove) on the circular scale
• On the thermostat: with the buttons
10.2.Programmedautomode
10.2.1Descriptionoftheprogrammedmode
Programming means setting of switching times and selection
of corresponding temperature values. Any temperature set for
a switch will remain in e󰀨ect until the time of the next switch.
Switching times can be specied with an accuracy of 1 minu-
te. Within the temperature range (the minimum and maximum
values of the adjustable range are 5°C and 99°C, respectively)
specied in the settings a di󰀨erent temperature can be chosen
for each switching time, in 0.5°C steps.
The device can be programmed for a period of one week. In the