Computherm E280 - Modifying Temperature until the Next Switch in the Program; 11 Practical Advices

- 39 -
succeedeachotherduringthecourseoftheday,i.e.you
shouldspecifyswitchesinchronologicalorder.
10.2.3. Modifyingtemperatureuntilthenextswitchinthe
 program:
When the thermostat is in programmed automatic mode but
you want to modify the set temperature temporarily until the
next switch in the program, you can do this in the following way:
• Using phone application: with the icons or mo-
ving the slide (groove) on the circular scale
• On the thermostat: with the buttons
The temperature set this way will remain in e󰀨ect until the next
switch in the program. The mode “Modifying temperature until
the next switch in the program” is indicated in the following way:
• In phone application: with the icon
• On the thermostat: with the ashing icon
11. PRACTICAL ADVICES
ProblemwiththeWi-Ficonnection
When the product cannot be controlled via Internet because the
application says that the device is not accessible and the device