Computherm E280 - Description of the Steps of Programming

- 36 -
programmed auto mode the thermostat operates automatically,
and cyclically repeats the entered switches every 7 days. The
following 3 options are available to program the thermostat:
• 5+2mode: setting 6 switches per day for 5 working days
and 2 switches per day for 2 days of the weekend
• 6+1mode: setting 6 switches per day from Monday till
Saturday and 2 switches on Sunday
• 7+0mode: setting 6 switches per day for every day of
the week
If you do not need all adjustable switches on certain days (e.g.
only 4 switches is required on working days), you can eliminate
unnecessary switches by setting their time and temperature to
the time and temperature of the last switch you want to use.
10.2.2.Descriptionofthestepsofprogramming
• Usingphoneapplication:
a) To enter programming mode touch the schematic illustra-
tion of programming: at the bottom of
the screen belonging to the thermostat for approximately 3
seconds. Then the screen for programming appears on the
display.
b) The indication of the currently selected programming mode