EasyManua.ls Logo

Comtec 2200 - Read before Operating this Machine

Comtec 2200
46 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.comtecltd.com For Kasco service use only.
ii
Read Before Operating This Machine
The following symbols are used on the machine and in this manual. Do not operate the
machine until you understand the meaning of these symbols
WARNING
Disconnect Power Supply
Before Servicing Machine
Dangerous Voltages
Potential lethal voltages and currents are present
within the machine. Service should only be done
by qualified personnel after disconnecting the
machines power source.
WARNING
Serious Physical Injury Possible
Keep All Body Parts Away From
Dies While Pressing
Crushing Force Warning
This warning is used near moving parts of the
machine that move with sufficient force to crush
or damage body parts. Never operate the
machine when any body parts are inside of these
areas.
CAUTION
HOT!
Hot Areas
This warning is on areas of the machine that
have a lot of heat associated with it. Serious
burns may result if personnel come in contact
with these areas.