Comtec 2200 - Hydraulic Oil Specifications

www.comtecltd.com For Kasco service use only.
v
IMPORTANT
Hydraulic Oil Specifications
BEFORE OPERATING THIS MACHINE, FILL THE
RESERVOIR WITH EITHER:
FIVE (5) GALLONS (18.9 LITERS) OF MINERAL
BASE “LIGHT” #32 HYDRAULIC OIL, 150 S.S.U.
VISCOSITY (EQUAL TO 10 WT. ENGINE OIL).
USE ONE OF THE NAME BRANDS (ARCO, ENCO,
STANDARD, SHELL, ETC) EQUAL TO CITGO
PACEMAKER #32.
OR
USE FIVE (5) GALLONS (20 QUARTS/18.9 LITERS)
OF S.A.E. 10 WEIGHT, AUTOMOTIVE ENGINE OIL,
FOR NON-DETERGENT SERVICE.
THE MOTOR STARTER SWITCH (LOCATED ON
THE MACHINE CROWN COVER) SHOULD BE IN
THE “OFF” POSITION BEFORE PLUGGING THE
MACHINE INTO THE APPROPRIATELY RATED
SINGLE PHASE, AC SERVICE OUTLET.
REFERENCE THE MACHINE’S NAME PLATE
INFORMATION FOR THE APPROPRIATE
ELECTRICAL OPERATING VOLTAGE.