6.
7.
8.
Installation of
Framelock
1
⁄
2
"
or
1,25 cm
Insert axle through axle tube on framelock.
Place framelock between footplates on Indoor Rower. The two
footplates may need to be pulled apart slightly for the axle tube
to fit. Be sure to line up axle tube to orient framelock as shown.
Tool Needed:
Allen Wrench
(provided)
Parts needed:
2 washers
2 screws
(actual size)
FRAME LOCK
Insert
1
/
2
" screw and washer into each end of framelock axle
tube, through holes in footplates. Tighten with allen wrench.
To Next Page
Loading...
