Conceptronic C150BRS4 - Windows Vista IP Address Setup

8
2-2-2. Windows Vista IP address setup:
A. Click „Start‟ button (it should be located at
lower-left corner of your computer), then
click control panel. Click View Network
Status and Tasks, and then click Manage
Network Connections. Right-click Local
Area Network, then select ‘Properties’.
Local Area Connection Properties window
will appear, select „Internet Protocol
Version 4 (TCP / IPv4)‟, and then click
„Properties‟.
B. Select „Obtain an IP address automatically‟
and „Obtain DNS server address
automatically‟, then click „OK‟.