Conceptronic C150BRS4 - Status - Traffic Statistic; Status - Wireless Client

62
7-2. Status - Wireless Client
This page shows wireless client‟s connection status, including MAC address, Channel bandwidth, etc.
MAC Address : Shows current MAC addresses of the hosts connecting to the Router.
Bandwidth : Shows current bandwidth of the hosts (wireless client).
7-3. Status - Traffic Statistic
Traffic statistics is used to show the LAN PC‟s traffic information.
Enable traffic statistics : Check to enable traffic statistics. Usually traffic statistics is disabled, which can
improve the Router‟s data handling. The default is disabled. If it is enabled, the page
will update the PC‟s traffic information automatically and be refreshed every 5
seconds.
IP address : The IP address to be shown.
Upstream rate : The speed of upstream data per second (Kbyte/S).
Downstream rate : The speed of downstream data per second (Kbyte/S).
Sending packet : The PC‟s packets sending from the PC.
Sending byte : The byte (Mbyte) sending from the PC.
Receiving packet : The PC‟s packets received from the Router.
Receiving byte : The PC‟s byte (Mbyte) received from the Router.