30
4-2. Wireless - Security
It is used to configure the AP network‟s security setting. Here presents the encryption methods, including WEP,
WPA-personal, WPA-enterprise, WPA2-personal, WPA2- enterprise, etc.
4-2-1. WEP
WEP (Wired Equivalent Privacy), a basic encryption method, usually encrypts wireless data using a series of digital
keys (64 bits or 128 bits in length). By using the same keys on each of your wireless network devices, you can
prevent unauthorized wireless devices from monitoring your transmissions or using your wireless resources.
SSID Choice : Select the SSID (main SSID or minor SSID) to configure security setting from the
drop-down menu.
Security Mode : From the drop-down menu select the corresponding security encryption modes.
Authentication Type : Use the „Open System‟ or „Shared Key‟ WEP encryption.
Encrypt Length : Select ‟64Bit‟ or „128Bit‟ encryption key length.
Default Key : Select one key from the four configured keys as the current available one.
WEP Key1~4 : Set the WEP key with the format of ASCII and Hex. You can enter ASCII code (5 or 13
ASCII characters. Illegal character as “/” is not allowed.) Or 10/26 hex characters.
To Next Page
Loading...
