35
4-2-6. WPA2 (Enterprise)
This security mode is based on Radius authentication server and WPA2 encryption method. WPA2 is used when a
RADIUS server is connected to the device.
SSID Choice : Select the SSID (main SSID or minor SSID) to configure security setting from the
drop-down menu.
Security Mode : From the drop-down menu select the corresponding security encryption modes.
WPA Algorithms : Provides TKIP [Temporal Key Integrity Protocol], AES [Advanced Encryption Standard] or
a combination of both.
Key Renewal Interval : Set the key‟s renewal period.
PMK Cache Period : Set the PMK cache period.
Pre-Authentication : Enable or disable the pre-authentication.
Radius IP Address : Enter the IP address of the Radius server.
Radius Port : Enter the authentication port of the Radius server. The default is 1812.
Shared Key : Enter the shared key for authentication server with 8~63 ASCII characters.
Session Timeout : The authentication interval period between AP and authentication server.
To Next Page
Loading...
