Conceptronic C150BRS4 - Advanced - Mac Filters

48
5-6. Advanced - MAC Filters
In order to manage the computers in LAN better, you could control the computer‟s access to Internet by MAC
Address Filter.
MAC Address Filter : Check to enable MAC address filter.
Access Policy : Select one number from the drop-down menu.
Enable : Check to enable the access policy.
Clear the Policy : Click “Clear” button to clear all settings for the policy.
Filter Mode : Click one radio button to enable or disable to access the Internet.
Policy Name : Enter a name for the access policy selected.
MAC Address : Enter the MAC address you want to run the access policy.
Times : Select the time range of client filter.
Days : Select the day(s) to run the access policy.
Apply : Click to make the settings go into effect.
For example: If you want to configure the host with MAC address 00:22:F7: AD:FF:C5 not to access the Internet
at 8：00-18：00, you need to set it as above.