28
Chapter IV: Configuration - Wireless
4-1. Wireless - Basic
Enable Wireless : Check to enable the Router‟s wireless features; uncheck to disable it.
Network Mode : Select one mode from the following. The default is 11b/g/n mode.
11b mode : Allow the wireless client to connect with the device in 11b mode at
the maximum speed of 11Mbps.
11g mode : Allow the 11g/11n-compliant client device to connect with the AP at
the maximum speed of 54Mbps.
11b/g mode : Allow the 11b/g-compliant client device to connect with the AP with
auto-negotiation speed, and 11n wireless client to connect the device
with 11g speed.
11b/g/n mode : Allow 11b/g/n-compliant client device to connect with the AP with
auto-negotiation speed.
Main SSID : SSID (Service Set Identifier) is the unique name of the wireless network. This device has
two SSID and the main SSID is necessary.
Minor SSID : It is optional.
Broadcast (SSID) : Select “Enable” to enable the device's SSID to be visible by wireless clients. The default
is enabled.
To Next Page
Loading...
