16
You can secure your Wireless Connection with encryption. By default, the wireless router is secured with
WPA-PSK/WPA2-PSK Mixed Mode encryption. The predefined encryption key can be found on the bottom of the
router.
Note: All security options of the Setup Wizard are explained, but it is advised to secure your network with
“Mixed WPA-PSK/WPA2-PSK” security if your Clients do not support WPS. This is the highest WPA2
security level, with backwards compatibility to WPA only clients.
Note: Remember or write down the entered wireless security information. You will need it when you want to
configure a Wireless Client to connect to the wireless router!
M. Select a security level for your
Wireless Network.
When a security level is chosen, the
Wizard will show fields for the
required information.
N. If you want to secure your network
with WEP encryption, select “WEP”
from the drop-down list. Enter the
WEP key in ASCII format (input: A-Z,
0-9).
Note: Through the Wizard you can
only configure WEP 64Bits.
Security – WEP Encryption
O. If you want to secure your network
with WPA-PSK or WPA2-PSK, select
“WPA-PSK”, “WPA2-PSK” or “Mixed
WPA-PSK/WPA2-PSK” from the
drop-down list.
Enter the Passphrase for your
encryption and confirm the
Passphrase in the second field.
Security – WPA-PSK / WPA2-PSK
To Next Page
Loading...
