PPPOE、NTP、Email、IP purview、DDNS parameter
Set channel title, preview hint icon state, transparency, cover area,
time title, channel title fold.
Note ： only analog channel can set channel name,region
cover ,time title,channel title fold.
Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check
Note：Hybrid mode shows PTZ configuration,
Set serial port function, baud rate, date bit, stop bit, check
Note：Full digital mode shows : RS485 Device
Set patrol mode and interval time
Set channel mode, check channel status and configure the digital
channel, etc.
Note：only HVR series support
Set appointed hard disk as read-write disc, read-only disc or redundant
disc, clear data, resume date and so on
Modify user, team or password. Add user or team. Delete user or team.
Break the connection with the already login user. Lock the account
after break until booting up again.
Adjust upside, downside, nearside, starboard distance, black margin
vertical & horizontal
Note：only analog channel have black margin vertical & horizontal
Set automatic reboot system and automatic deleting files.
Resume setup state: common setup, code setup, recording setup,
alarm setup, network setup, network service, preview playback, serial
port setup, user management
upgrade with external device(like USB)
device hardware configuration and message
To Next Page
Loading...
