P45
4.38 RS485 device
【Protocol】choose related protocol of brand model；
【Address】set with corresponding address, default is 1；
【Baud rate】choose bard rate that related device use, default is 115200；
【Data bits】including 5-8 options，default is 8；
【Stop bits】including 2 options, default is 1；
【Parity】Include odd check, even check, sign check, blank check. Default: void.
4.4.7 Tour
Set the patrol display. means that the tour mode is enable. You can choose the single-view,
four-view, six-view of single mode tour or hybrid mode tour.
Pic 4.40 tour configure
To Next Page
Loading...
