Need help?Do you have a question about the Conceptronic C8XVR and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Video Input | 8 BNC |
| Video Compression | H.264 |
| USB Port | 2x USB 2.0 |
| Power Supply | 12V DC |
| Network Interface | RJ45 |
Step-by-step guide for safely starting, shutting down, and rebooting the DVR unit.
Process for activating the DVR by setting an admin password and optional GUID export.
Guidance on using setup wizards for signal input, language, network, and HDD settings.
Procedure to reset the admin password using a GUID file and export it for recovery.
Steps for activating, adding, and editing connected IP cameras for system integration.
Sets up PTZ parameters like baud rate, data bit, protocol, and copies settings across channels.
Sets resolution, frame rate, bitrate, and stream types for recording main and sub-streams.
Configures motion detection areas, sensitivity, trigger channels, and response actions.
Configures VCA alarms including face, vehicle, line crossing, and intrusion detection.
Adds, deletes, edits user accounts, and assigns permissions for system access.
Solves problems with no video output, incorrect input mode, or beep sounds from new devices.
Addresses issues with live view freezing, audio problems, and playback glitches.
Resolves issues where no record files are found, due to time, search, or HDD problems.
To Next Page
