Conceptronic C8XVR - Configuring NTP Server

Digital Video Recorder User Manual
148
 NO-IP:
Enter the account information in the corresponding fields. Refer to the DynDNS
settings.
1) Enter Server Address for NO-IP.
2) In the Device Domain Name text field, enter the domain obtained from the NO-IP
website (www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP website.
Figure 11-8 NO-IP Settings Interface
Step 5 Click the Apply button to save and exit the interface.
11.2.4 Configuring NTP Server
Purpose
A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the accuracy of
system date/time.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the NTP tab to enter the NTP Settings interface.
Figure 11-9 NTP Settings Interface
Step 3 Check the Enable NTP checkbox to enable this feature.
Step 4 Configure the following NTP settings:
 Interval: Time interval between the two synchronizing actions with NTP server. The unit is
minute.
 NTP Server: IP address of NTP server.