Digital Video Recorder User Manual
39
Channel Port: If the connected device is an encoding device with multiple channels, you can
choose the channel to connect by selecting the channel port No. in the drop-down list.
Step 2 Click OK to save the settings and exit from the editing interface.
Step 3 Drag the horizontal scroll bar to the right side and click the icon to edit the advanced
parameters.
Figure 2-43 Network Configuration of the Camera
Step 4 You can edit the network information and the password of the camera.
Figure 2-44 Password Configuration of the Camera
Step 5 Click OK to save the settings and exit the interface.
2.8 Configuring the Signal Input Channel
Purpose
You should configure the analog and IP signal input types.
To Next Page
Loading...
