Digital Video Recorder User Manual
40
Step 1 Enter the Signal Input Status interface.
Menu > Camera > Signal Input Status
Step 2 Check the checkbox to select different signal input types: HD/CVBS and IP. If you select
HD/CVBS, four types of analog signal inputs including HDTVI, AHD, HDCVI, and CVBS can be
connected randomly for the selected channel. If you select IP, IP camera can be connected
for the selected channel.
Figure 2-45 Configure Signal Input Type
Step 3 Click Apply to save the settings.
Four kinds of analog signal inputs including HDTVI, AHD, HDCVI and CVBS can be connected.
The analog signal inputs can be recognized automatically and can be mixed randomly.
When HDTVI, AHD, or HDCVI input is connected, the information including the resolution
and frame rate (e.g., 720P25) will be overlaid on the bottom right corner of the live view
for 5 seconds. When CVBS input is connected, the information such as NTSC or PAL will be
overlaid on the bottom right corner of the live view for 5 seconds. When there is no video
signal for the channel, the connectable video signal type message will not be displayed on
the screen. When the unsupported signal input is connected, no video message is displayed
on the screen. You can refer to the specifications for the supported resolution of the analog
signal input types.
You can view the max. IP camera accessible number in the Max. IP Camera Number text
field.
To Next Page
Loading...
