Digital Video Recorder User Manual
167
Figure 12-16 Storage Mode Settings Interface
Step 4 Select a camera for which you want to configure quota.
Step 5 Enter the storage capacity in the text field of Max. Record Capacity (GB).
Step 6 You can copy the quota settings of the current camera to other cameras if required. Click
the Copy button to enter the Copy Camera interface, as shown in Figure 12-17.
Figure 12-17 Copy Settings to Other Camera(s)
Step 7 Select the camera (s) to be configured with the same quota settings. You can also click the
checkbox of Analog to select all cameras.
Step 8 Click the OK button to finish the Copy settings and back to the Storage Mode interface.
Step 9 Click the Apply button to apply the settings.
If the quota capacity is set to 0, then all cameras will use the total capacity of HDD for record.
12.5 Checking HDD Status
Purpose
To Next Page
Loading...
