Digital Video Recorder User Manual
147
11.2.3 Configuring DDNS
Purpose
If your DVR is set to use PPPoE as its default network connection, you may set Dynamic DNS (DDNS)
to be used for network access.
Prior registration with your ISP is required before configuring the system to use DDNS.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the DDNS tab to enter the DDNS Settings interface.
Step 3 Check the Enable DDNS checkbox to enable this feature.
Step 4 Select DDNS Type. Three different DDNS types are selectable: DynDNS, PeanutHull and
NO-IP.
DynDNS:
1) Enter Server Address for DynDNS (i.e. members.dyndns.org).
2) In the Device Domain Name text field, enter the domain obtained from the DynDNS
website.
3) Enter the User Name and Password registered in the DynDNS website.
Figure 11-6 DynDNS Settings Interface
PeanutHull: Enter the User Name and Password obtained from the PeanutHull
website.
Figure 11-7 PeanutHull Settings Interface
To Next Page
Loading...
