Digital Video Recorder User Manual
146
Guarding Vision is disabled by default.
The verification code is empty when the device leaves factory.
The verification code must contain 6 to 12 letters or numbers and is case sensitive.
For the old versions of DVR with Guarding Vision enabled, if you upgrade it, Guarding
Vision is still enabled. If you disable it and then enable it for the first time, you need to
change the verification code if the encrypted verification code is the same with that of the
configuration file, or the encrypted verification code is empty and the verification code of
configuration file is ABCDEF. In these two conditions, you should create a new verification
code or you can delete the default one and input the same verification code with the
default one.
Every time you enable Guarding Vision, the Terms of Service interface pops up and you
should check the checkbox before enabling it.
Step 4 (Optional) Check the checkbox of Custom and input the Server Address.
Step 5 (Optional) Check the checkbox of Enable Stream Encryption.
After this feature is enabled, the verification code is required for remote access and live
view.
You can use the scanning tool of your phone to quickly get the code by scanning the QR code
below.
Figure 11-5 Guarding Vision Settings Interface
Step 6 Click the Apply button to save the settings.
After configuration, you can access and manage the DVR by your mobile phone on which
the Guarding Vision application is installed (download "Guarding Vision" through Google
Play (Android) or the Apple Store (Apple iOS)) or by the website (www.guardingvision.com).
Please refer to the help file on the official website (www.guardingvision.com) and the Guarding
Vision Mobile Client User Manual for adding the device to Guarding Vision and more operation
instructions.
To Next Page
Loading...
