Conceptronic C8XVR - Configuring Network Detection; Testing Network Delay and Packet Loss

Digital Video Recorder User Manual
156
Figure 11-20 Network Traffic Interface
Step 2 You can view the sending rate and receiving rate information on the interface. The traffic
data is refreshed every 1 second.
11.3 Configuring Network Detection
Purpose
You can obtain network connecting status of DVR through the network detection function,
including network delay, packet loss, etc.
11.3.1 Testing Network Delay and Packet Loss
Step 1 Enter the Network Traffic interface.
Menu > Maintenance > Net Detect
Step 2 Click the Network Detection tab to enter the Network Detection interface.
Figure 11-21 Network Detection Interface
Step 3 Select a NIC to test network delay and packet loss.
Step 4 Enter the destination address in the text field of Destination Address.
Step 5 Click the Test button to start testing network delay and packet loss.