Digital Video Recorder User Manual
26
Figure 2-16 Language Configuration
Operating the Setup Wizard:
Step 1 The Start Wizard can walk you through some important settings of the device. If you don’t
want to use the Start Wizard at that moment, click Exit. You can also choose to use the
Start Wizard next time by leaving the “Start wizard when device starts?” checkbox
checked.
Figure 2-17 Start Wizard Interface
Step 2 Click Next button to enter the Change the Password interface.
1) Input the Admin Password.
2) (Optional) Check the checkbox of New Admin Password, input the New Password and
confirm it.
3) (Optional) Check the checkbox of Enable Pattern Unlock and draw the unlock pattern.
Or click icon of Draw Unlock Pattern to change the pattern. Refer to Chapter 2.3
Using the Unlock Pattern for Login for reference.
4) (Optional) Click icon of Export GUID to export GUID to the connected USB flash
disk for resetting password. Refer to Chapter 17.5.3 Editing a User for reference.
To Next Page
Loading...
