Digital Video Recorder User Manual
47
Menu> Configuration> Live View
Figure 3-8 Live View-General (1)
Figure 3-9 Live View-General (2)
The settings available in this menu include:
Video Output Interface: Selects the output to configure the settings.
HDMI/VGA serves as the video output interface.
Live View Mode: Selects the display mode to be used for Live View.
Dwell Time: The time in seconds to dwell between switching of channels when enabling
auto-switch in Live View.
Enable Audio Output: Enables/disables audio output for the selected camera in the live view
mode.
Volume: Adjust the volume of the audio output.
Event Output: Designates the output to show event video. If available, you can select a
different video output interface from the Video Output Interface when an event occurs.
Full Screen Monitoring Dwell Time: The time in seconds to show alarm event screen.
Step 2 Set the camera order.
1) Click View tab and select the Video Output Interface from the drop-down list.
To Next Page
Loading...
