Conceptronic C8XVR - Page 7

Digital Video Recorder User Manual
7
 Remaining recording time of the HDD can be viewed;
 Support cloud storage;
 S.M.A.R.T. and bad sector detection;
 HDD sleeping function;
 HDD property: redundancy, read-only, read/write (R/W);
 HDD group management;
 HDD quota management; different capacity can be assigned to different channels.
Recording and Playback
 Holiday recording schedule configuration;
 Cycle and non-cycle recording modes;
 Normal and event video encoding parameters;
 Multiple recording types: manual, continuous, alarm, motion, motion | alarm, motion & alarm
and Event;
 8 recording time periods with separated recording types;
 Support Channel-Zero encoding;
 Main stream and sub-stream configurable for simultaneous recording;
 Pre-record and post-record for motion detection triggered recording, and pre-record time for
schedule and manual recording;
 Searching record files and captured pictures by events (alarm input/motion detection);
 Customization of tags, searching and playing back by tags;
 Locking and unlocking of record files;
 Local redundant recording and capture;
 When HDTVI, AHD, or HDCVI input is connected, the information including the resolution and
frame rate will be overlaid on the bottom right corner of the live view for 5 seconds. When
CVBS input is connected, the information such as NTSC or PAL will be overlaid on the bottom
right corner of the live view for 5 seconds.
 Searching and playing back record files by camera number, recording type, start time, end time,
etc.;
 Smart playback to go through less effective information;
 Main stream and sub-stream selectable for local/remote playback;
 Zooming in for any area when playback;
 Multi-channel reverse playback;
 Supports pause, fast forward, slow forward, skip forward, and skip backward when playback,
locating by dragging the mouse on the progress bar;
 8-ch synchronous playback;
Backup