connexx Smart Remote - Resetting volume and hearing program (for programmed Smart Remote only)

26 27
Resetting volume and hearing program
(for programmed Smart Remote only)
If you have made changes to volume or program and do
not know why the hearing instruments are acting the way
they are, you can manually set the default volume and
hearing program for your hearing instruments.
XTo enter the menu, press the volume up button and the
volume down button simultaneously.
XNavigate to the menu entry HI Restore by pressing the
volume up button or the volume down button.
XConfirm your selection by pressing
the program change button.
The hearing instruments are
reset and a corresponding icon is
displayed.
XYou can also reset the hearing instruments
by pressing the control button next to the
following icon.
The control buttons have to be configured by
your Hearing Care Professional.
Displaying contact data
If your Hearing Care Professional has saved his or her
contact data on the remote control, you can view this
information:
XTo enter the menu, press the volume up button and the
volume down button simultaneously.
XNavigate to the menu entry Contact by pressing the
volume up button or the volume down button.
XConfirm your selection by pressing
the program change button.
The contact data is displayed.
XTo return to the standard display, press the program
change button.