Need help?Do you have a question about the Consew P1206RB and is the answer not in the manual?
General| Brand | Consew |
|---|---|
| Model | P1206RB |
| Category | Sewing Machine |
| Language | English |
Introduces the sewing machine's design and suitability for heavy-weight materials.
Provides key technical details like sewing speed, stitch length, needle type, and motor output.
Details the steps for installing the oil pan and safety switch magnet onto the table.
Instructions for mounting the machine head onto the work table, including hinges and cushions.
Guidance on attaching the knee lifter assembly to the machine's shaft.
Steps to adjust the knee lifter mechanism for proper presser foot control.
Information on checking and maintaining the oil level in the oil pan for lubrication.
Procedure for initial test operation and observing oil circulation.
Instructions on how to correctly install the sewing needle, including orientation.
Steps to remove the bobbin case from the hook shaft.
Guide on how to wind thread onto the bobbin using the bobbin winder.
Procedure for threading the bobbin thread into the bobbin case and hook.
Instructions for threading the main needle thread through the machine's guides.
How to adjust the stitch length using the stitch length dial and reverse lever.
Basic sewing operation and how to use the backtacking function.
Guidance on adjusting needle and bobbin thread tension for optimal stitch quality.
Steps to adjust the pressure of the presser foot and walking foot.
Detailed adjustment of the thread tension spring for precise tension control.
How to adjust the upper thread guide to control thread take-up tension.
Procedure to set the correct height of the presser foot.
How to adjust the height of the feed dog for proper material feeding.
Steps to adjust the angle of the feed dog for different sewing effects.
How to adjust stitch length for forward and reverse sewing.
Procedure to adjust the timing of the thread tension discs.
Detailed steps for synchronizing the needle and feed mechanisms.
How to adjust the amount of oil for the rotary hook lubrication.
Procedure to set the needle bar height and synchronize it with the hook timing.
How to adjust the oil pump to ensure proper oil circulation.
How to adjust the lifting amount of the presser foot and walking foot.
Instructions for cleaning the feed dog, needle plate, hook, and oil pump filter.
Details the components of the machine's casting mechanism.
Lists parts related to the needle bar and thread take-up assembly.
Details the components of the machine's presser foot assembly.
Lists parts related to the machine's feed mechanism.
Details the components of the machine's upper feed mechanism.
Lists parts related to the machine's hook mechanism.
Details the components of the machine's lubrication system.
Lists the included accessories for the sewing machine.
To Next Page
