Contax Tvs III - Manual Focus Shooting

6. Manual Focus Shooting
Dial Lock Release Button
You can set focus position manually.
® Turn the main power switch or focus dial while
pressing the dial lock release button, and set
'Manual Focus Range(0.5 - oo)'.
(D When you turn the dial, shooting
distance(focusing point) is displayed on display
panel. Set your desired shooting distance.
• Shooting distance is displayed while moving the focus dial.
It is displayed for approx.2 seconds after the focus dial has
stopped.
• Set shooting distance is displayed for approx.2 sec. by
pressing the shutter release button half way down.
• Focus display is lighted to match setting shooting distance
in the viewfinder.
• Set the shooting distance referring to ’Depth of field table'
on next page.
(D Decide on the size of subject and compose It.
Then press the shutter release button. The
shutter trips to match the shooting distance.
160