Contax Tvs III - Custom Functions

This camera has six kinds of "Custom Functions" as shown in the following table. When you use the camera first time
after purchase, it has been set to the standard set of Functions(item 0). (Instructions in this manual refer to Case 0
unless otherwise stated.)
If you want to change the Custom functions, refer to "Setting the Custom Functions" on Page 175.
Functions>
standard Setting
(0) (1)
Setting Change
(2)
<List of the Custom
Item No.
Function No.
CF1:Remaming film at
film rewound
CF2:The timing of lens
moving forward
CF3:Focuslng Range of
Auto Focusing (*)
The film leader is rewound into
the cassette
Just before the shutter trips
Program Auto: Multi Focus
Aperture Priority Auto: Multi
Focus
The film leader is left out of the
cassette
When shutter release button half¬
way down
Program Auto: Spot Focus
Aperture Priority Auto: Spot
Focus
Program Auto: Multi Focus
Aperture Priority Auto: Spot Focus