Contec CMS50D+ - Page 43

39
electromagnetic
site survey,
a
should
be less than the
compliance level in
each frequency
range.
b
Interference may
occur in the
vicinity of
equipment marked
with the following
symbol:
NOTE 1 At 80 MHz and 800 MHz, the higher
frequency range applies.
NOTE 2 These guidelines may not apply in all
situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and
people.
a
Field strengths from fixed transmitters, such
as base stations for radio (cellular/cordless)
telephones and land mobile radios, amateur radio, AM
and FM radio broadcast and TV broadcast cannot be