negligence or accident.
4 This warranty shall not extend to any instrument from which the manufacturer’s original serial
number tag or product identification marking have been altered or removed.
5 The product were operated and used not properly.
Attachment 1 Product Specification
A1.1 Monitor
Physical Characteristics
Size: 320 (length) × 260 (width) × 80 (height) mm
Weight: about 3.2 Kg
Security: The Monitor obey the following norms and standards: IEC 60601-1-4
④
IEC 60601-1-2
Anti-shock types: Facilities I, no internal power supply
Anti-electric Shock Degree: B
Degree of protection against Harmful Ingress of Water: Moderate equipment and do not have the
ability to waterproof immersion
Degree of Safety in Presence of Flammable Gases: not suitable for use in presence of flammable
gases
Electromagnetic Compatibility: Group
Ⅰ
Class A
Mode: continuous work
Power Supply
Working Voltage: AC 100V ~ 240V
Frequency: 50Hz/60Hz
P
④
60VA
Fuse: T1.6AL
Environment
Transport and storage
Temperature: -10 °C ~55 °C
Relative Humidity: ≤ 93%
Atmospheric pressure: 70kPa ~ 106kPa
Working environment
Temperature: 5 °C~ 40 °C
Relative Humidity: ≤ 80%
Atmospheric pressure: 70kPa ~ 106kPa
Display
Dimensions: 8.4 "color LCD display, folding 60 degree
Display Content: bed No. , pregnancy age, age, single/twins type, paper speed, date,
time , volume, alarm status, transducer connection status, recorder status, FHR data
and wave, Contraction data and wave, Fetal move times and mark etc.
Print: Record Paper two-double type Z
Print Width: 112mm
Valid Print Width: 104mm
Paper output speed: 1cm/min
④
2cm/min
④
3cm/min(optional)
Data Precision: 5
④④
X Roll
④④
±1
④④
Y Roll
④
To Next Page
Loading...
Need help?
General
