We recommend that you use the wrist rest , however, if for any reason
you would like to remove the wrist rest, lift the front edge of the RollerMouse
and rest it in your left hand. Fit the wrist rest removal key into the slot at
the right end of the unit and twist the key counter-clockwise.
To install the wrist rest after removal, snap it into the slot on the front edge of
your RollerMouse Red.
To change button from a double click function to a middle button
function, hold buttons and for two seconds until LED lights ashes
to conrm. Repeating this process will revert back to double click function.
/9
B
H
B
H
Wrist rest
4
5
Changing the ‘Double’ click button to middle
H
UK_Red_User_Guide.indd 10 01/06/2017 10.36