Contour RollerMouse Red - Inserting the Keyboard Risers; Adjusting the Keyboard Risers

RollerMouse Red user guide
Line up the grooves of the short and long risers and then press the
two parts together until you hear them snap into place.
Adjusting the keyboard risers
Inserting the keyboard risers
Fit the end of the riser into the slot on the back of the RollerMouse Red.
2
2 3
/4
2
2
3
Neutral elevated
Neutral at
Positive tilt
Negative tilt
UK_Red_User_Guide.indd 5 01/06/2017 10.36