Contour ShuttlePRO v2 User Manual

2.2 Opening the Shuttle Device Control Panel
As standard Control Panels, Shuttle device Control Panels may be accessed at any time without
having to close out an application, powering-down, and/or restarting. This section briefly
describes how to access the Shuttle device Control Panel.
Step 1.
Step 2.
Step 3.
Go to the Apple Menu in the upper left hand corner of your monitor’s screen.
Click and move down the list to the Control Panels submenu.
In the Control Panels submenu locate and click on Contour ShuttlePRO or
Contour ShuttleXpress.
Note for ShuttlePRO series users:
the Shuttle device Control Panel can also be accessed
through the Control Strip:
Step 1.
Step 2.
Step 3.
Locate and open the Control Strip to extend it onto the monitor screen.
Click on the Shuttle device tab.
Click on Open ShuttlePRO Control Panel.
Fig. 2-1 Open ShuttlePRO Control Panel through the Control Strip
Contour Shuttle Multimedia Controllers 5

Contour ShuttlePRO v2 Specifications

General

Brand	Contour
Model	ShuttlePRO v2
Category	Control Panel
Language	English