Signal Indicator
As a stand-alone switch, the NeuroNode3 has built-in indicators in order to notify
the user at the instance of a good signal or switch.
A green light indicates an EMG/Spatial signal was counted as a switch.
A blinking red light indicates the NeuroNode3 is Bluetooth broadcasting.
Upon powering up the NeuroNode3, the device will go through a launch
sequence as a series of colors: red, green, blue, and white.
Battery Management Signal Indicator
The NeuroNode3 Signal Indicator light will start blinking yellow when the battery
voltage drops below 3.5 Volts, indicating that the battery should be charged
within 1 hour. The NeuroNode3 will remain usable and continue blinking yellow
until the battery voltage falls to 3.4.
When the NeuroNode3 battery voltage drops below 3.4 Volts, the Signal Indica-
tor light will remain solid yellow and the device will no longer be usable until it is
charged.
EMG Signal
Bluetooth Broadcasting
Low Battery
PAGE 13 | GETTING STARTED
To Next Page
Loading...