Main Menu:
Touching this button will return the user to the Main
Menu.
Save Settings:
Touching this button will direct the NeuroNode3 to
store the current Switching parameters (see Display
Settings) once the device’s Bluetooth is turned off. On
power-up, the NeuroNode3 will load these saved
settings to be used as the working Switching parame-
ters.
Graph Settings:
Refer to Section 4.3.2 to learn more about the
NeuroNode Controller Graph Settings.
Reset Resting Level:
Touching this button will set a new baseline based on
the user's current EMG/Spatial resting level. The button
is grayed-out if Auto Baseline is not turned on.
Pause/Play:
Touching this button will toggle the real-time
EMG/Spatial graph on (sweeping) and off (paused).
Pausing the graph will put the NeuroNode3 in a
low-power mode, nearly tripling its battery life. Also,
when Paused, the NeuroNode3 will be disconnected as
an input device. This can be helpful for performing
maintenance or updates to the device.
PAGE 18 | ACCESSORIES
To Next Page
Loading...